Description

Tall, slim and elegant, the Vintage Classic VIII builds on the SM version with a larger floorstanding cabinet for a fuller, richer and more engaging sound. True to the Vintage Classic Series, the VIII is built within a rectangular cabinet with rich walnut veneer panels and striking baffle detail, including anodised gold trim and analogue control knobs set on a dedicated panel detailing frequency response graphs. Using the 200mm (8”) Vintage Classic IsoFlare with FyneFlute roll surround and proven 25mm magnesium dome compression tweeter, this sumptuously retro design integrates a smaller form factor BassTrax porting system to deliver phenomenal bass from the relatively compact cabinet. Finished with the Vintage Classic woven cloth grille, the VIII will integrate seamlessly into any room.

System Type	2 way, downwards firing port, twin cavity, BassTrax Tractrix diffuser
Recommended amplifier power (Watt RMS)	30 – 200
Peak power handling (Watt)	400
Continuous power handling (Watt RMS)	100
Sensitivity (2.83 Volt @ 1m)	91dB
Nominal impedance	8 Ohm
Frequency response (-6dB typical in room)	30Hz – 34kHz
Drive unit complement	1 x 200mm IsoFlare point source driver, multi-fibre bass / midrange cone, FyneFlute surround with 25mm magnesium dome compression tweeter, ferrite magnet system. Cryo-Lite treated.
Crossover frequency	1.8kHz
Crossover type	Bi-wired passive low loss, 2nd order low pass, 1st order high pass
System adjustments	High frequency energy (1.8kHz – 26kHz) +/- 3dB, Presence (2.5kHz – 5.0kHz) +/- 3dB
Dimensions – HxWxD	873 x 380 x 300mm (34.4 x 15.0 x 11.8″)
Weight – Each	29.1kg
Finishes	Walnut
Cabinet Construction	High density fibreboard, walnut veneered with extensive internal bracing

Additional information

Weight	35500 g
Title	Default Title

Reviews

There are no reviews yet.

Be the first to review “Fyne Audio Vintage Classic VIII Floorstanding Speaker”